To create a cross-sectional slice position [Part]
The theme of what the best-best cross-section obtained by slicing the position, and which to create a cross-sectional slice with respect to the position of the throat (STL) parts to molding to molding the laminate, is a clear answer yet challenge is not out. This theme is very important directly related to the reproducibility of the shape like (pitch = laminated) layer thickness in molding and lamination.
Was even a little touched, "Slice preview of new Magics15" entry of a little before that it has received a request and want a little more detail, we introduce now.
Described as a cone to modeling as easy to understand.
Although I think that is as the right image and Sintering the cone of the left image above is that you realize no need to explain, reflected in the shape of the original step (pitch stacked =) layer thickness of the laminate looks like the image below and be.
Range is the range that is color-coded to "layer" of the stack.
Molding equipment required by the cross-sectional slice is obtained by slicing the position of the pitch somewhere in this range of provision from the reference point.
Looks like this: if you have a closer look at the preview of Magics15 slice it.
Top criteria is the result of slices, the central criterion, based on the image from the bottom.
Software and accessories by molding apparatus, Do you need a cross-sectional slice with respect to the position of the throat (STL) is different from attempting to molding parts Again.
[To be continued to Part;
