e-Stage5: to support multi-core CPU (2)
Let us now consider the following cases.
Suppose you take a processing time of one minute there are 100 pieces of data temporarily if a single device: Example 1.
Support could be generated after all will be (1 hour and 40 minutes) = 100 minutes (min) × 1 (one) 100.
If three devices Example 2:
Suppose you take a processing time of one minute there are 100 pieces of data per unit.
Support could be generated after all will be (5 hours) minutes = 300 (units) × 3 (minute) × 1 (one) 100.
This is called thread that is carried out in terms of CPU processing on your computer. ~Tsu, Please google using the keyword, etc. For more information, see "A thread is" for the thread.
e-Stage is so automatic processing, while the generation process of the time support personnel to create data, but the free, PC for e-Stage is as long as you have reached the maximum number of threads available to process CPU will not be able to do anything else until the end of the calculation. This is (300 minutes I do not) that do not have to wait not only a matter of time occupied by the computer simply to be able to process any data other than e-Stage on that PC minute at least 100 There is also that. If you also must be prepared following data modeling, there may be situations when you should digest and other business have been concurrently. The thing itself is becoming impossible If you must use other software, you can work on the same PC in the first place.
I want to improve the time it is occupied by the PC to operate efficiently is the time of human occupation is, of course?
The number of threads that can be e-Stage will process will vary by the number of CPU cores (※), and then processed by the CPU core of the two usually a thread.
Try to temporarily assume the quad-core CPU.
Since e-Stage5 to be processed by a thread basically two core As mentioned above, two cores will be free of the four core and that normal operation. This free instead of "vacant in vain" is a free "will be launched already a thread" But.
That two threads can be processed, you will be without any stress to the platform that you can prepare more than one minute of data at the same time. To run the e-Stage After placing the parts. Parts of the platform to the next place to start the Magics and the other one. To run the e-Stage After you have placed, this is a repeat.
You can become if Hekisakoa CPU "thread the other two will be launched" in that way, at the same time to generate support for the platform of a total of three minutes. It will be very expensive and will also go over it with the CPU Okutakoa, if there is a very large number of stereolithography machine presence or absence of the core after the first five are alive and have Hekisakoa CPU.
CPU of six in the CPU die one CPU Koahekisakoa CPU ... 1 four of them in the CPU die of one CPU core quad-core CPU ... 1 of 2 in the CPU die of one dual-core CPU ... 1 for the number of (※) CPU core (The company planned Intel) CPU core of eight in a single CPU die Koaokutakoa CPU ... 1
[Continue]
